What is the advantage of using Carbon steel 10d bends over other types of bends?
What materials are commonly used to manufacture Hot induction 10d bending?
10d pipe bend specification
Radii | Bending Angle | Types |
---|---|---|
10D | 15° to 180° |
|
Outer Diameter | Sizes | Wall thickness |
38.0 – 206.0 mm |
|
SCH 5 to SCH XXS |
Ends | ASME Standard | Surface finishes |
Bevel End / Buttweld | ASME B31.3 |
|
Available Material at Mesta Inc | Delivery Time | Different Bending methods |
|
7-14 days |
|
10d carbon steel pipe bend
Duplex 90 degree 10d pipe fitting bend
Super duplex 10d pipe bend
Cuni welded 10d bends
Inconel long radius 10d bend
SS 10d pipeline bends
10D pipe bend dimensions
Standard pipes | Spec | . Bauart 5 | 2,5D | |
---|---|---|---|---|
Diameter Nominal | Dia. [ØD] | CLR | CLR | CLR |
20 | 26,9 | 110 | 67 | |
25 | 33,7 | 110 | 84 | |
32 | 42,4 | 110 | 106 | |
40 | 48,3 | 110 | 212 | |
50 | 60,3 | 125 | 151 | |
65 | 76,1 | 175 | 190 | |
80 | 88,9 | 205 | 222 | |
100 | 114,3 | 270 | 286 | |
125 | 139,7 | 330 | 350 | |
150 | 168,3 | 390 | 421 | |
200 | 219,1 | 510 | ||
250 | 273 | 650 | ||
300 | 323,9 | 775 | ||
350 | 355,6 | 850 | ||
400 | 406,4 | 970 | ||
500 | 508 | 1245 |
10D bend radius
Gauge | Includes Minimum Closeness of Cutout to Bend | (Refers to Inner Radius) |
11 gauge (0.120" |3.05mm) | .5" | .07", .08", .09", .1", .125" |
14 gauge (0.075" | 1.9 mm) | .275" | .05", .055", .062", .07", .075" |
.375" | .07", .105" | |
.5" | .09", .11", .115", .12" | |
1.375" | .4" | |
16 gauge (0.060" | 1.52 mm) | .2" | .035", .05" |
.265" | .05", .055", .075", .08" | |
.375" | .07" | |
.5" | .105", .12" | |
18 gauge (0.048" | 1.22 mm) | .2" | .04", .045", .05" |
.265" | .06", .07", .08", .085" | |
.375" | .1", .125" | |
.5" | .115", .12" | |
20 gauge (0.035" | 0.89 mm) | .2" | .05" |
.265" | .06", .07" | |
.375" | .095" | |
22 gauge (0.029" | 0.74 mm) | .2" | .05" |
.265" | .04", .08" | |
24 gauge (0.024" | 0.61 mm) | .2" | .04" |
.265" | .08" |
What is the maximum angle of deflection for an Asme b16.9 welded 10d bends?
How does the centerline radius of a Stainless steel 10d bending affect the flow of fluid through the pipe?
What is the difference between a 90 degree 10d bend and a standard pipe elbow?
What is the difference between a seamless and welded Buttweld 10d pipe bend, and which is better suited for certain applications?