| Material | Types | Sizes |
|---|---|---|
| ASTM A234 WPB |
|
|
| Schedules | Tolerance | Techniques |
| Sch 5 to Sch XXS | ±1% | Casting / Cold press |
| Surface | ASME / ANSI | Connection |
|
|
Welding |
| Types | Delivery time | Packing |
| Seamless / Welded | Within 15-20 workdays | Wooden Box / Wrap |
| Products | Price |
| A420 WPL6 45D ELBOW(L) DN50 | US $8.38 per kg |
| ASTM A420 WPL6 45D ELBOW (L), S80, DN250 | US $2.29 per kg |
| SA420 WPL6-S REDUCING TEE, S40, 80DN | US $3.21 per kg |
| ASTM A420 WPL6 REDUCING TEE, S40, 80DN | US $3.21 per kg |
| CAP BW A420-WPL6 STD 3 | US $1.45 per kg |
ASTM a420 wpl6 pipe fittings
ASTM a420 wpl6 buttweld pipe fittings
ASTM a420 wpl6 buttweld pipe fittings
SA 420 WPL6 Stub End
ASTM A420 Gr WPL6 Short radius elbow
ASTM A420 WPL6 1.5d elbow
ASTM A420 WPL6 Long radius elbow
ASTM A420 WPL6 2d elbow
A420 WPL6 Tee
ASME SA420 WPL6 5d elbow
A420 Gr WPL6 10d elbow
SA420 grade WPL6 Cap
SA 420 Gr WPL6 4d elbow
ASME SA420 WPL6 Reducing Tee
ASTM A420 Gr WPL6 8d elbow
A420 WPL6 1d elbow
A420 grade WPL6 3d elbow
A420 Gr WPL6 180 degree elbow
SA 420 Gr WPL6 Equal Cross
ASTM A420 Gr WPL6 Seamless fittings
ASTM A420 WPL6 6d elbow
A420 Gr WPL6 Welded fittings
SA 420 Gr WPL6 90 degree elbow
A420 grade WPL6 45 Degree elbow
A420 wpl6 weld fittings
ASME sa420 wpl6 buttweld fittings
SA420 wpl6 fittings
| NPS in Centimeter |
O.D. In MM | 45 Degree Elbow |
90 Degree Elbow | Buttweld Tee | Buttweld Cap | |
|---|---|---|---|---|---|---|
| B | Long Radius A |
Short Radius A |
C | E | ||
| 1.27 | 21.336 | 5/8 | 1-1/2 | – | 1 | 1 |
| 1.905 | 26.67 | 7/16 | 1-1/8 | – | 1-1/8 | 1-1/4 |
| 1 | 33.401 | 7/8 | 1-1/2 | 1 | 1-1/2 | 1-1/2 |
| 2.54 | 42.164 | 1 | 1-7/8 | 1-1/4 | 1-7/8 | 1-1/2 |
| 2.54 | 48.26 | 1-1/8 | 2-1/4 | 1-1/2 | 2-1/4 | 1-1/2 |
| 5.08 | 60.325 | 1-3/8 | 3 | 2 | 2-1/2 | 1-1/2* |
| 5.08 | 73.025 | 1-3/4 | 3-3/4 | 2-1/2 | 3 | 1-1/2 |
| 7.62 | 88.9 | 2 | 4-1/2 | 3 | 3-3/8 | 2* |
| 7.62 | 101.6 | 2-1/4 | 5-1/4 | 3-1/2 | 3-3/4 | 2-1/2* |
| 10.16 | 114.3 | 2-1/2 | 6 | 4 | 4-1/8 | 2-1/2* |
| 12.7 | 141.3002 | 3-1/8 | 7-1/2 | 5 | 4-7/8 | 3* |
| 15.24 | 168.275 | 3-3/4 | 9 | 6 | 5-5/8 | 3-1/2* |
| 20.32 | 219.075 | 5 | 12 | 8 | 7 | 4* |
| 25.4 | 273.05 | 6-1/4 | 15 | 10 | 8-1/2 | 5* |
| 30.48 | 323.85 | 7-1/2 | 18 | 12 | 10 | 6* |
| 35.56 | 355.6 | 8-3/4 | 21 | 14 | 11 | 6-1/2* |
| Elements | WPL6, % |
| Carbon [C] | ≤0.30 |
| Manganese [Mn] | 0.50-1.35 |
| Phosphorus [P] | ≤0.035 |
| Sulfur [S] | ≤0.040 |
| Silicon [Si] | 0.15-0.40 |
| Nickel [Ni] | ≤0.40 |
| Chromium [Cr] | ≤0.30 |
| Molybdenum [Mo] | ≤0.12 |
| Copper [Cu] | ≤0.40 |
| Columbium [Cb] | ≤0.02 |
| Vanadium[V] | ≤0.08 |
| ASTM A420 | Tensile Strength, min. | Yield Strength, min. | Elongation %, min | |||
| Grade | ksi | MPa | ksi | MPa | Longitudinal | Transverse |
| WPL6 | 65-95 | 415-655 | 35 | 240 | 22 | 12 |
| Melting Point | 1480 - 1526 °C |
| Impact Test Temperature | -45℃ |
| Temperature Range | 700°F |
| Size of Specimen | A* | B* | ||
|---|---|---|---|---|
| mm | ft·lbf | J | ft·lbf | J |
| 10 by 10.0 | 13 | 17.6 | 10 | 13.6 |
| 10 by 7.5 | 10 | 13.6 | 8 | 10.8 |
| 10 by 5.0 | 7 | 9.5 | 5 | 7.0 |
| 10 by 2.5 | 4 | 5.4 | 3 | 4.1 |
| *Temp. | -20~100 | 150 | 200 | 250 | 300 | 400 | 500 | 600 |
| *YS | 35.0 | 32.9 | 32.1 | 31.5 | 31.0 | 22.9 | 28.5 | 26.8 |
| *Temp. | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 |
| *YS | 25.9 | 25.1 | 24.2 | 23.5 | 22.8 | 22.1 | 21.5 | 20.8 |
| *Temp. | -20~100 | 300 | 600 | 400 | 500 | 200 | 650 |
| *TS | 60.0 | 60.0 | 60.0 | 60.0 | 60.0 | 60.0 | 60.0 |
| *Temp. | 700 | 800 | 950 | 850 | 900 | 750 | 1000 |
| *TS | 60.0 | 55.1 | 39.4 | 50.2 | 44.8 | 59.3 | 34.6 |
| Temperature °F | S, ksi |
|---|---|
| -50~100 | 20.0 |
| 200 | 20.0 |
| 300 | 20.0 |
| 400 | 19.9 |
| 500 | 19.0 |
| 600 | 17.9 |
| 650 | 17.3 |
| 700 | 16.7 |
| 750 | 13.9 |
| 800 | 11.4 |
| 850 | 8.7 |
| 900 | 5.9 |
| 950 | 4.0 |
| 1000 | 2.5 |