ASTM A234 WPB tee manufacturer in India

Is ASTM A234 WPB tee heat resistant?

Based on the material's composition, the length of exposure, and the presence of additional agents, a tee's heat resistance can change. Carbon steel ASTM A234 WPB tee has a low heat resistance. Under 600°C (1112°F) is the suggested maximum working temperature for the material.
An ASTM A234 WPB tee may not be the best option for high-temperature applications, despite the fact that it can withstand moderate temperatures under normal working conditions. It is advised to look at several specialised heat-resistant alloys if you require an exceptionally heat-resistant tee.

Top notch SA234 WPB equal tee suppliers in Mumbai

What is the difference between A234 WPB equal tee and ASTM A234 Gr WPB reducing tee?

The inlet and output of an A234 WPB equal tee are both the same size. As a result, the tee's three branches are all the same diameter. It can maintain a constant flow's quantity and direction.
On the other hand, an ASTM A234 Gr WPB reducing tee has variously sized inlet and output branches. It allows the pipe diameter to alter or diverges to smaller pipe diameters. This permits a seamless changeover between several pipe sizes within a plumbing system.

Is A234 Gr WPB lateral tee the same as SA 234 Gr WPB straight tee?

A 45-degree or 90-degree outlet branch perpendicular to the main line of the tee is a feature of an A234 Gr WPB lateral tee. This makes it possible to attach a side outlet. It is frequently employed in situations when a branch line must make a right-angle intersection with the main pipe.
The three branches of a SA 234 Gr WPB straight tee are all at the same angle and diameter. It is sometimes referred to as a standard tee or equal tee. It develops a T-junction, that has inlet and outlet sized equally.

ASTM A234 WPB Tee specification

Standard	Sizes	Surface finish
ASTM A234	Seamless: 1/2" – 24" One welding seam: 26" – 36" Two welding seam: 38" – 72"	Galvanized Black Phosphating Anti Corrosive Shot blasting Mirror Oiled Paint Hairline Black
Application	Types	Manufacturing process
Power Generation Chemical Equipment Petrochemicals Aeronautical Pharmaceutical Equipment Sea Water Equipment	Equal Tee Reducing Tee Barred Tee Unequal Tee	Cast Press Push Forge
Delivery time	Dimensions	Origin
USA - 28 - 67 days UK - 5 Weeks Canada - 6 - 12 days	BS4504 ASME B16.9 ANSI B16.9 MSS-SP-43	Indian / Korean / USA / Ukraine / European / Japanese / Russian
Connection	Certificates	Manufacturing types
Welding	Raw Materials Certificate EN 10204/3.1B Third Party Inspection report	Seamless / Welded / ERW
Equipment	End Type	Schedule
Bending machine Pushing Machine Press machine	Bevel Plain	SCH5,SCH10,SCH10,SCH20,SCH30,SCH40,STD,XS,SCH60

ASTM A234 Wpb Tee Price in India

DESCRIPITION	SIZE	CLASS	MATERIAL	DIME	END	UNIT	UNIT RATE INR	UNIT RATE USD
UNEQUAL TEE	1" X 1/2" NB	SCH 80 X 80	A 234 WPB	B 16.9	BW	NOS	247.50	US $ 2.99
EQUAL TEE	1" NB	SCH 80	A 234 WPB	B 16.9	BW	NOS	198.00	US $ 2.39
EQUAL TEE	4" NB	6.4 MM THK	A 234 WPB	B 16.9	BW	NOS	1320.00	US $ 15.95
EQUAL TEE	6" NB	6.4 MM THK	A 234 WPB	B 16.9	BW	NOS	3135.00	US $ 37.87
UNEQUAL TEE	4" X 2" NB	6.4 MM THK X SCH 80	A 234 WPB	B 16.9	BW	NOS	2310.00	US $ 27.91
UNEQUAL TEE	6" X 2" NB	6.4 MM THK X SCH 80	A 234 WPB	B 16.9	BW	NOS	5775.00	US $ 69.77
UNEQUAL TEE	6" X 4" NB	6.4 X 6.4 MM THK	A 234 WPB	B 16.9	BW	NOS	3465.00	US $ 41.86

Types of ASTM A234 WPB tee

ASTM A234 wpb tee

Tee a234 wpb

ASTM A234 wpb pipe tees

ASTM A234 gr wpb tee

SA234 gr wpb tee

Steel A234 tees gr.wpb

ASTM A234 Grade WPB Tee dimensions

ASTM A234 Grade WPB Tee Dimensions

NPS	O.D. D	Center to End C	Center to End M
1/2	21.3	25	25
3/4	26.7	29	29
1	33.4	38	38
1.1/4	42.2	48	48
1.1/2	48.3	57	57
2	60.3	64	64
2.1/2	73	76	76
3	88.9	86	86
3.1/2	101.6	95	95
4	114.3	105	105
5	141.3	124	124
6	168.3	143	143
8	219.1	178	178
10	273	216	216
12	323.8	254	254

A234 WPB tee chemical composition

Grade	C	S	Nb	Cr	Si	Ni	Mo	Cu	P	Mn	V
WPB	0.3	0.058	0.02	0.4	0.1min	0.4	0.15	0.4	0.05	0.29-1.06	0.08

ASTM A234 WPB carbon steel tee mechanical properties

Tensile Requirements	WPB
Tensile Strength	60-85
(0.2% offset or 0.5% extension-under-load)	[415-585]
Yield Strength	32
Yield Strength	[240]

What is the manufacturing process of Tee A234 WPB?

The initial step in any tee manufacturing is material selection. With a Tee A234 WPB, the next is cutting the material into desired lengths and dimensions.
The cut pieces are then heated to a suitable temperature to make them malleable.
The tee then undergoes a heat treatment process to enhance its mechanical properties.
The tee may undergo machining processes like threading or beveling, that prepare it for installation.
Depending on the application, the tee may receive a surface coating or protective treatment.

What is the wall thickness of ASTM A234 Grade WPB Tee?

The wall thickness is a vital consideration and can vary based on the tee's specific requirements and dimensions.
The right wall thickness of an ASTM A234 Grade WPB tee can be measured by considering the application and design requirements.
A specific wall thickness is not specified in the standard specification for carbon steel pipe fittings.
Factors like pressure rating, temperature, material properties, and structural considerations can help determine a tee's wall thickness.

Best 6 applications of ASTM A234 WPB carbon steel tee

An ASTM A234 WPB carbon steel tee is widely used in oil and gas pipelines for branching off a pipeline into multiple directions. They are used in both onshore and offshore installations.
An ASTM A 234 WPB barred tee finds applications in petrochemical plants for diverting or combining flow streams in various process systems.
They are used in power plants for branching off steam or water lines, allowing for the distribution of fluids to different equipment and systems within the power generation facility.

An SA 234 WPB buttweld pipe tee is also used in chemical treatment plants, water treatment facilities and HVAC systems.