| Material | Sizes | Types |
|---|---|---|
| Stainless steel 310 |
|
|
| Test Certificates | WNR | ASME |
|
1.4841 |
|
| Pressure Rating | DIN Pressure | UNS |
| Class 150 to Class 2500 | PN 6 to PN64 | UNS S31000 |
| Products | Price |
| SUS310 FLANGE 156X15T PCD 130.2 | US $ 319.07 per piece |
SA182 Gr F310 Forged Flange
ASTM A182 F310 Slip on Flange
DIN 1.4841 Blind Flange
SUS 310 Weld Neck Flanges
AISI 310 Plate Flange
Stainless Steel 310 Lap Joint Flange
A182 Gr F310 Threaded Flange
Inox 310 Ring and Spacer
ASTM A182 F310 Spectacle Blind Flange
310 SS Long weld neck flange
SA182 F310 Reducing Flange
Inox 310 Expander Flange
UNS S31000 Socket Weld Flange
SUS 310 RTJ Flanges
310 SS Ring Joint Flanges
A182 F310 BLRF Flanges
UNS S31000 SORF Flanges
SA182 Gr F310 Raised Face Flange
AISI 310 Tongue and groove flange
310 SS WNRF Flanges
A182 F310 SWRF Flanges
DIN 1.4841 Flat Face Flanges
ASTM A182 Grade F310 Pipe Flanges
SA182 F310 Exhaust flanges
Class 150 310 Stainless Steel flanges
Class 300 SA182 F310 flange
Class 600 A182 Gr F310 pipe flanges
Class 900 ASTM A182 Grade F310 flanges
Class 1500 310 Stainless Steel plate flange
Class 2500 SA182 F310 flanges
| Nominal Size | Bore Diameter (B) | Outside Diameter (OD) | Bolt Hole Diam. | No. of Bolt Holes | Hub Length (L) | Bolt Circle (BC) | Thickness (T) | Lap Radius ( R ) | Hub Diam. (H) | Approx. Weight (lbs) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 1.38 | 4.25 | 0.625 | 4 | 0.688 | 3.13 | 0.563 | 0.13 | 1.938 | 2 |
| 1 1/4 | 1.72 | 4.68 | 0.625 | 4 | 0.813 | 3.50 | 0.625 | 0.19 | 2.312 | 3 |
| 1 1/2 | 1.97 | 5.00 | 0.625 | 4 | 0.875 | 3.88 | 0.688 | 0.25 | 2.563 | 3 |
| 2 | 2.46 | 6.00 | 0.750 | 4 | 1.000 | 4.75 | 0.750 | 0.31 | 3.063 | 5 |
| 2 1/2 | 2.97 | 7.00 | 0.750 | 4 | 1.125 | 5.50 | 0.875 | 0.31 | 3.563 | 7 |
| 3 | 3.60 | 7.50 | 0.750 | 4 | 1.188 | 6.00 | 0.938 | 0.38 | 4.250 | 8 |
| 3 1/2 | 4.10 | 8.50 | 0.750 | 8 | 1.250 | 7.00 | 0.938 | 0.38 | 4.812 | 11 |
| 4 | 4.60 | 9.00 | 0.750 | 8 | 1.312 | 7.50 | 0.938 | 0.44 | 5.312 | 13 |
| 5 | 5.69 | 10.00 | 0.875 | 8 | 1.438 | 8.50 | 0.938 | 0.44 | 6.438 | 15 |
| 6 | 6.75 | 11.00 | 0.875 | 8 | 1.562 | 9.50 | 1.000 | 0.50 | 7.562 | 18 |
| 8 | 8.75 | 13.50 | 0.875 | 8 | 1.750 | 11.75 | 1.125 | 0.50 | 9.688 | 30 |
| 10 | 10.92 | 16.00 | 1.000 | 12 | 1.938 | 14.25 | 1.188 | 0.50 | 12.000 | 42 |
| 12 | 12.92 | 19.00 | 1.000 | 12 | 2.188 | 17.00 | 1.250 | 0.50 | 14.375 | 64 |
| 14 | 14.19 | 21.00 | 1.125 | 12 | 2.250 | 18.75 | 1.375 | 0.50 | 15.750 | 90 |
| 16 | 16.19 | 23.50 | 1.125 | 16 | 2.500 | 21.25 | 1.438 | 0.50 | 18.000 | 98 |
| 18 | 18.20 | 25.00 | 1.250 | 16 | 2.688 | 22.75 | 1.562 | 0.50 | 19.875 | 125 |
| 20 | 20.25 | 27.50 | 1.250 | 20 | 2.875 | 25.00 | 1.688 | 0.50 | 22.000 | 160 |
| 24 | 24.25 | 32.00 | 1.375 | 20 | 3.250 | 29.50 | 1.875 | 0.50 | 26.125 | 212 |
| 30** | 30.25 | 38.75 | 1.375 | 28 | 3.500 | 36.00 | 2.125 | 0.50 | 32.750 | 305 |
| 36** | 36.25 | 46.00 | 1.625 | 32 | 3.750 | 42.75 | 2.375 | 0.50 | 39.250 | 440 |
| Grade | C | Si | Mn | S | P | Mo | Cr | N | Ni |
|---|---|---|---|---|---|---|---|---|---|
| SS 310 | 0.015 max | 0.15 max | 2.0 max | 0.015 max | 0.020 max | 0.10 max | 24.00 - 26.00 | 54.7 min | 19.00 - 21.00 |
| Density | Tensile Strength | Melting Point | Elongation | Yield Strength (0.2%Offset) |
|---|---|---|---|---|
| 7.9 g/cm3 | Psi – 75000 , MPa – 515 | 1402 °C (2555 °F) | 40 % | Psi – 30000 , MPa – 205 |
| Grade | WERKSTOFF NR. | JIS | UNS | GOST | BS | EN | AFNOR |
|---|---|---|---|---|---|---|---|
| SS 310 | 1.4841 / 1.4307 | SUS 310 | S31000 | 20Ch25N20S2 | 310S24 | X15CrNi25-20 | - |
| Properties | at | Value | Unit |
| Density | 8,000 | Kg/m3 | |
| Electrical Resistivity | 25°C | 0.78 | Micro ohm.m |
| Electrical Conductivity | 25°C | 1.25 | %IACS |
| Modulus of Elasticity | 20°C | 200 | GPa |
| Shear Modulus | 20°C | 77 | GPa |
| Thermal Conductivity | 100°C | 14.2 | W/m.°C |
| Melting Rnage | 1400-1450 | °C | |
| Specific Heat | 500 | J/kg.°C | |
| Poisson's Ratio | 20°C | 0.30 | |
| Relative Magnetic Permeability | 1.02 |
| BOLT DIA |
Torque FT-LBS | ||
| 100% Final Torque |
70% Torque |
30% Initial Torque |
|
| 1/2 | 52 | 36 | 16 |
| 3/4 | 184 | 129 | 55 |
| 9/16 | 75 | 53 | 23 |
| 5/8 | 104 | 73 | 31 |
| 7/8 | 237 | 166 | 71 |
| 1.1/4 | 596 | 417 | 179 |
| 1 | 356 | 249 | 107 |
| 1.1/8 | 424 | 297 | 127 |
| 1.3/8 | 622 | 435 | 186 |
| 1.1/2 | 821 | 574 | 246 |
| 1.9/16 | 560 | 392 | 168 |
| 1.5/8 | 636 | 445 | 191 |
| 1.3/4 | 801 | 561 | 240 |
| 1.7/8 | 994 | 696 | 298 |
| 2 | 1219 | 853 | 366 |
| 2.1/2 | 2442 | 1709 | 733 |
| 2.1/4 | 1762 | 1234 | 529 |
| 2.3/4 | 3285 | 2300 | 986 |
| 3 | 4297 | 3008 | 1289 |
| Heat Treatment | 1040 -1065°C |