What factors should be considered when selecting a gi puddle flange for a specific application?
How is an ms puddle flange connected to the main piping system?
Puddle Flange specification
Size | Connect Type | Production technique |
---|---|---|
1/2" to 48" | Flat Face / Raised Face / RTJ | Forged / Heat treated / machined |
Coating | Pressure Rating | Equipment |
|
Class 150 to Class 2500 |
|
Types of Puddle flange
Stainless steel pipe puddle flange
Inconel puddle flange
Nickel alloy square puddle flange
CS water tank puddle flange
Duplex 90mm puddle flange
SDSS adjustable puddle flange
Stainless steel puddle flange weight chart
O D |
NPS | Sch 10 |
Sch 30 |
Sch 20 |
Sth. Wall |
Sch 60 |
Sch 120 |
Extra Strong |
Sch 40 |
Sch 160 |
Sch 80 |
Sch 100 |
Sch 140 |
Double Extra Strong |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.840 | 1/2” | 0.674 | 0.622 | 0.546 | 0.622 | 0.464 | 0.546 | 0.252 | ||||||
1.050 | 3/4” | 0.884 | 0.824 | 0.742 | 0.824 | 0.612 | 0.742 | 0.434 | ||||||
1.315 | 1” | 1.097 | 1.049 | 0.957 | 1.049 | 0.815 | 0.957 | 0.599 | ||||||
1.660 | 1.1/4” | 1.442 | 1.380 | 1.278 | 1.380 | 1.160 | 1.278 | 0.896 | ||||||
1.900 | 1.1/2” | 1.682 | 1.610 | 1.500 | 1.610 | 1.338 | 1.500 | 1.100 | ||||||
2.375 | 2” | 2.157 | 2.067 | 1.939 | 2.067 | 1.687 | 1.939 | 1.503 | ||||||
2.875 | 2.1/2” | 2.635 | 2.469 | 2.323 | 2.469 | 2.125 | 2.323 | 1.771 | ||||||
3.500 | 3” | 3.260 | 3.068 | 2.900 | 3.068 | 2.624 | 2.900 | 2.300 | ||||||
4.000 | 3-1/2” | 3.760 | 3.548 | 3.364 | 3.548 | 3.364 | 2.728 | |||||||
4.500 | 4” | 4.260 | 4.026 | 3.624 | 3.826 | 4.026 | 3.438 | 3.826 | 3.152 | |||||
5.563 | 5” | 5.295 | 5.047 | 4.563 | 4.813 | 5.047 | 4.313 | 4.813 | 4.063 | |||||
6.625 | 6” | 6.357 | 6.065 | 5.501 | 5.761 | 6.065 | 5.187 | 5.761 | 4.897 | |||||
8.625 | 8” | 8.329 | 8.071 | 8.125 | 7.981 | 7.813 | 7.187 | 7.625 | 7.981 | 6.813 | 7.625 | 7.437 | 7.001 | 6.875 |
10.750 | 10” | 10.420 | 10.136 | 10.250 | 10.020 | 9.750 | 9.062 | 9.750 | 10.020 | 8.500 | 9.562 | 9.312 | 8.750 | 8.750 |
12.750 | 12” | 12.390 | 12.090 | 12.250 | 12.000 | 11.626 | 10.750 | 11.750 | 11.938 | 10.126 | 11.374 | 11.062 | 10.500 | 10.750 |
42.000 | 42” | 41.250 | 41.000 |
Carbon steel puddle flange pressure rating
Temperature (°C) |
Class | ||||||
---|---|---|---|---|---|---|---|
Class 600 | Class 300 | Class 150 | Class 900 | Class 400 | Class 2500 | Class 1500 | |
-29 - 38 | 103.4 | 51.7 | 19.8 | 155 | 68.9 | 431 | 259 |
50 | 103.4 | 51.7 | 19.5 | 155 | 68.9 | 431 | 259 |
100 | 103.0 | 51.5 | 17.7 | 155 | 68.7 | 429 | 258 |
150 | 100.3 | 50.2 | 15.8 | 151 | 66.8 | 418 | 251 |
200 | 97.2 | 48.6 | 13.8 | 146 | 64.8 | 405 | 243 |
250 | 92.7 | 46.3 | 12.1 | 139 | 61.7 | 386 | 232 |
300 | 85.7 | 42.9 | 10.2 | 129 | 57.0 | 357 | 214 |
325 | 82.6 | 41.4 | 9.3 | 124 | 55.0 | 344 | 207 |
350 | 80.0 | 40.0 | 8.4 | 120 | 53.4 | 334 | 200 |
375 | 75.7 | 37.8 | 7.4 | 114 | 50.4 | 315 | 189 |
400 | 69.4 | 34.7 | 6.5 | 104 | 46.3 | 290 | 174 |
425 | 57.5 | 28.8 | 5.5 | 86.3 | 38.4 | 240 | 144 |
450 | 46.0 | 23.0 | 4.6 | 69.0 | 30.7 | 192 | 115 |
475 | 34.2 | 17.1 | 3.7 | 51.3 | 22.8 | 142 | 85.4 |
500 | 23.2 | 11.6 | 2.8 | 34.7 | 15.4 | 96.5 | 57.9 |
538 | 11.8 | 5.9 | 1.4 | 17.7 | 7.9 | 49.2 | 29.5 |
What are the methods used to test the integrity of a stainless steel puddle flange installation?
What are the requirements for the thickness of the integral puddle flange according to industry standards?
What is the maximum allowable pressure for a mechanical puddle flange according to industry standards?
What are the typical installation procedures for a carbon steel puddle flange in a piping project?