Monel Pipe Fittings specification
Material | Sizes | Connection |
---|---|---|
Monel | 1/2 to 18 inch | Welding |
Types | Equipment | Manufacturing process |
|
|
|
Schedule | Delivery time | Origin |
SCH 5 - SCH 10,XXS | Saudi Arabia : 4 - 5 days Nigeria : 28 - 30 days UK : 27 - 29 days |
Japanese / Russian / USA / European / Indian / Ukraine / Korean |
End type | Certificates | Dimensions |
|
EN 10204/3.1B Raw Materials Certificate Third Party Inspection report |
|
Surface finish | Manufacturing types | Bending Radius |
|
Seamless / Welded / ERW | 6D / 3D / 1D / 2D / 10D / 8D / 5D |
Types of Monel pipe fittings manufacturer in India
Monel pipe fittings
Alloy 400 elbow
Monel metal alloy reducer
UNS N05500 Seamless fittings
Monel K500 2d elbow
Alloy 400 1d elbow
DIN 2.4375 4d elbow
Monel K500 6d elbow
Monel 400 3d elbow
Monel K500 Reducing Tee
Monel K500 90 degree elbow
Monel 400 Cap
Monel 8d elbow
DIN 2.4360 1.5d elbow
Alloy K500 Equal Cross
Monel 400 Concentric reducer
DIN 2.4360 45 Degree elbow
ASTM B366 UNS N04400 Reducer
UNS N05500 Long radius elbow
Monel Short radius elbow
Alloy K500 Stub End
Alloy 400 180 degree elbow
DIN 2.4375 Tee
UNS N04400 5d elbow
Monel 400 Welded fittings
UNS N04400 Eccentric reducer
ASTM B366 UNS N04400 10d elbow
Monel 400 fittings dimensions
NPS in Centimeter |
O.D. In MM | Buttweld Tee | 45 Degree Elbow |
Buttweld Cap | 90 Degree Elbow | |
---|---|---|---|---|---|---|
C | B | E | Long Radius A |
Short Radius A |
||
1 | 33.401 | 1-1/2 | 7/8 | 1-1/2 | 1-1/2 | 1 |
5.08 | 73.025 | 3 | 1-3/4 | 1-1/2 | 3-3/4 | 2-1/2 |
10.16 | 114.3 | 4-1/8 | 2-1/2 | 2-1/2* | 6 | 4 |
2.54 | 42.164 | 1-7/8 | 1 | 1-1/2 | 1-7/8 | 1-1/4 |
7.62 | 88.9 | 3-3/8 | 2 | 2* | 4-1/2 | 3 |
5.08 | 60.325 | 2-1/2 | 1-3/8 | 1-1/2* | 3 | 2 |
1.27 | 21.336 | 1 | 5/8 | 1 | 1-1/2 | – |
7.62 | 101.6 | 3-3/4 | 2-1/4 | 2-1/2* | 5-1/4 | 3-1/2 |
1.905 | 26.67 | 1-1/8 | 7/16 | 1-1/4 | 1-1/8 | – |
30.48 | 323.85 | 10 | 7-1/2 | 6* | 18 | 12 |
12.7 | 141.3002 | 4-7/8 | 3-1/8 | 3* | 7-1/2 | 5 |
2.54 | 48.26 | 2-1/4 | 1-1/8 | 1-1/2 | 2-1/4 | 1-1/2 |
20.32 | 219.075 | 7 | 5 | 4* | 12 | 8 |
25.4 | 273.05 | 8-1/2 | 6-1/4 | 5* | 15 | 10 |
15.24 | 168.275 | 5-5/8 | 3-3/4 | 3-1/2* | 9 | 6 |
35.56 | 355.6 | 11 | 8-3/4 | 6-1/2* | 21 | 14 |
Alloy 400 elbow chemical composition
Grade | Ni | Mn | C | Si | Cu | S | Fe |
---|---|---|---|---|---|---|---|
400 | 63.00 min | 2.00 max | 0.30 max | 0.50 max | 28.00 – 34.00 | 0.024 max | 2.50 max |
K500 | 63.00 min | 1.5 max | 0.25 max | 0.5 max | 27.00 – 33.00 | 0.010 max | 0.5 – 2 |
Monel fittings mechanical properties
Grade | Melting Point | Density | Tensile Strength | Elongation | Yield Strength (0.2%Offset) |
---|---|---|---|---|---|
400 | 1350 °C (2460 °F) | 8.8 g/cm3 | Psi – 80,000 , MPa – 550 | 40 % | Psi – 35,000 , MPa – 240 |
K500 | 1350 °C (2460 °F) | 8.44 g/cm3 | Psi – 160000 , MPa – 1100 | 20 % | Psi – 115000 , MPa – 790 |
Nickel alloy 400 equal tee equivalent grade
Grade | UNS | EN | WERKSTOFF NR. | JIS | GOST | BS | AFNOR |
---|---|---|---|---|---|---|---|
400 | N04400 | NiCu30Fe | 2.4360 | NW 4400 | МНЖМц 28-2,5-1,5 | NA 13 | NU-30M |
K500 | N05500 | - | 2.4375 | - | - | - | - |
Frequently asked questions
What is the maximum temperature of the Monel 400 elbow?
A Monel 400 elbow can be generally used in temperatures up to roughly 538°C (1000°F). The material retains its corrosion resistance and strength even in such high temperatures.
Is Monel k500 fittings rust proof?
Monel k500 fittings show high corrosion resistance, although they aren’t completely rust-proof. They can still undergo corrosion depending on the operating conditions.
What is the hardness of the DIN 2.4360 reducer?
A DIN 2.4360 reducer or Monel 400 reducer, shows hardness in the range of 70-85 HRB. The hardness can vary depending on the manufacturing process and applied heat treatment.
Is ASTM B564 UNS N04400 buttweld end cap magnetic or not?ASTM B564 UNS N04400 buttweld end cap (Monel buttweld end cap) is generally non-magnetic. However, it may show some magnetic properties due to the presence of impurities or heat treatment.
What is the shear strength of the Monel k500 short radius elbow?
The exact sheer strength of the Monel K500 short radius elbow can be determined through tests or by referring to the manufacturer’s specifications.
Nickel alloy 400 equal tee vs nickel 400 reducing tee reducing tee
A Nickel alloy 400 equal tee has the same size openings on all three branches, which splits flow of liquid or gas equally in three directions. The opening sizes on Nickel 400 reducing tee are different, that merges or splits flow in different sizes.
What is the density of ASME SB564 UNS N04400 long radius elbow?
The density of ASME SB564 UNS N04400 long radius elbow is 8.83 grams per cubic centimetre (g/cm³) or 8,830 kilograms per cubic meter (kg/m³).