Mesta INC is manufacturer of Inconel 825 Gaskets in India. The completed gasket is fitted into a steel ring of specific thickness. When the gasket is fitted into a flange and the bolt load is applied, flange closure is governed by the outer steel ring of the gasket. Different types of gaskets are used to achieve the leak proof sealing between the flanges. Mesta Inc. is one of the leading manufacturers and suppliers of Inconel 600, Inconel 625, Inconel 825, Inconel spiral wound gasket in India, which is prepared with a productive factory. The primary function of gaskets is to seal the irregularities of each face of the flange so that there will be no leakage of the service fluid from the flange joint.
| Gasket | Specification |
|---|---|
| Type of Gasket | Inconel 825 Spiral Wound Gasket manufacturer, Inconel 825 Type R Ring Gasket manufacturer, Inconel 825 Metal Jacketed Gasket manufacturer, Inconel 825 Ring Type Joint Gasket manufacturer, Inconel 825 Camprofile Gasket manufacturer, Inconel 825 Grooved Gasket manufacturer. |
| Gasket Sizes | Gaskets are available from 1/2 NB - 24 NB |
| Gasket Standards | ASTM B425 / ASME SB425 |
| Inconel Gaskets | Inconel 600 Gaskets, Inconel 625 Gaskets, Inconel 825 Gaskets. |
| Other Materials | Low Carbon Steel Gasket, Carbon steel Gasket, 4 - 6% Chrome 1/2% Moly Gaskets, 20Cb-3(Alloy 20 Gasket), Hastelloy B2 Gasket, Hastelloy C276 Gasket, Incoloy 800 Gasket, Inconel 825 Gasket, Inconel X750 Gasket, Monel 400 Gasket, Stainless Steel 304 Gasket, Stainless Steel 316 Gasket, Stainless Steel 347 Gasket, Stainless Steel 410, Nickel 200 Gasket, Titanium Gasket |
| Outside Diameter | The gasket outside diameter tolerance for NPS 1⁄2 through NPS 8 is ±0.8 mm; for NPS 10 through NPS 24, +1.5 mm, −0.8 mm. |
| Inside Diameter | The gasket inside diameter tolerance for NPS 1⁄2 through NPS 8 is ±0.4 mm; for NPS 10 through NPS 24, ±0.8 mm. |
| Thickness | The gasket thickness tolerance is ±0.13 mm measured across the metallic portion of the gasket, not including the filler, which may protrude slightly beyond the metal. |
| Test Certificate | Manufacturer Test Certification En 3.1 and 3.2, IBR Test Certificate |
We are a manufacturer, supplier and exporter of Inconel 825 Gaskets (UNS N06625/ W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C).
This mixture of elements also is responsible for larger resistance to a wide range of corrosive environments of rare harshness as well as to high-temperature effects such as oxidation and carburization. We also deliver Inconel 825 Insulation Gaskets kit which protects a flange set from cathodic corrosion.
|
C |
Mn |
P |
S |
Si |
Cr |
Ni |
Ti |
Al |
Cu |
|---|---|---|---|---|---|---|---|---|---|
|
0.02 |
1.00 |
0.02 |
0.01 |
0.35 |
21.0 |
32.0 |
0.4 |
0.4 |
0.30 |
|
Yield Strength (0.2% offset) |
Ultimate Tensile Strength |
Elongation (%) |
|---|---|---|
|
430 MPa |
940 MPa |
51.5 |
|
Density |
Specific Gravity |
Melting Range |
|---|---|---|
|
8.44g/cm3 |
8.44 |
1280oC ~ 1350 oC |
We are leading manufacturer and suppliers of Inconel 600, Inconel 625, Inconel 825, Inconel 601, Inconel 617, Inconel 718 in India. Mesta Inc. offers CGI type (with inner ring & outer ring), CG type (only with outer ring), R type (without inner & outer ring), RIR type (only with inner ring) and also in Monel, Hastelloy, Inconel, Nickel Alloy and other material. These gaskets are proved to be suitable in most applications, and allow lower clamping forces than solid gaskets, although with a higher cost. Our Inconel 825 Spiral Wound Gaskets are suitable for use even at very high pressure and temperature. Our Inconel 825 Spiral Wound Gaskets have corrected dimension and they ensure perfect sealing. We also deliver Monel 400 Gaskets, Nickel Alloy 200 , Hastelloy B3, Hastelloy C22, Hastelloy C276 Gaskets. We make sure that all our products are dimensionally accurate with top notch finish and high in usability as well as strength.
| Product supplied | City |
|---|---|
| Inconel 825 Spiral Wound Gaskets for Raised Face Flanges | New Delhi |
| 2 Containers of Spiral Wound Gasket Exported for flanges with DIN EN 1092-1 | Saudi Arabia |
| Stainless Steel Camprofile Gaskets used for Raised Face Flanges with ASME B16.5 | Gujarat |
| Stainless Steel Metal Jacketed Gasket | Chennai |
spiral wound gasket manufacturers, asme b16.20 gasket manufacturer, gaskets for flanges, gasket for raised face flanges, gaskets for ring type joint flanges, gaskets for industrial flanges, asme b16.21 gaskets manufacturer, gasket manufacturer in india, gasket manufacturer in delhi, gasket manufacturer in mumbai, gasket manufacturer in chennai, gasket suppliers in india, gasket supplier in mumbai, asme b16.20 gasket suppliers
We, Mesta INC has a wide range of Inconel 825 Gaskets Best-quality products. We Mesta INC is manufacturers of Inconel 825 Gasket products in India. Mesta INC is India's largets manufacturers of Inconel 825 Gasket products. We are leading Inconel 825 Gasket supplier in Mumbai, Pune, Vapi, Chennai, Hyderabad, Gujarat, Delhi, Rajkot, Surat, Bangalore, Haryana and other major Indian cities.
Mesta INC is India's largest Manufacturers and supplier of Inconel 825 Gasket in Mumbai, Rajkot, Delhi, Hyderabad, Pune, Chennai, Ahmedabad, Surat, Vadodara, Coimbatore and other major cities. We are India's leading Manufacturer and supplier of Inconel 825 Gasket product. We have our sales offices in different cities of India. Our head office is located in Mumbai and we supply inconel 600 Gasket to all major cities of India from Mumbai.
Mesta INC are exporters of Inconel 825 Gasket in Mexico, Dubai, USA, Qatar, UAE, Kuwait, China, Saudi Arebia, Bahrain, Singapore and more than 50+ other countries. Mesta INC is Manufacturers and Exporter of Inconel 825 Gasket product in India. Our Main office is located in Mumbai and we provide Inconel 825 Gasket to all major cities of India from Mumbai. We have our sales offices in different cities of India.
| Manufacturer Exporter of Piping Spool, LR Bends/Long Radius Pipe Bends, Gasket in: | ||||
|---|---|---|---|---|
| Saudi Arabia | Oman | Kuwait | Netherlands | Iran |
| Bahrain | Qatar | UAE | Africa | China |
| Nigeria | Mexico | Canada | Venezuela | United Kingdom |
| United States | South Africa | Malaysia | Bangladesh | Turkey |
| Singapore | Sri Lanka | Australia | Brazil | |
